Industrial Scientific Tango® TX1 Single-Gas Detector
Eliminate distractions with a lightweight and wearable personal monitor that offers maintenance-free gas detection. A two-year runtime and patented DualSense® Technology increase worker safety, regardless of bump test frequency, while reducing overall costs.
- DualSense® Technology increases worker safety by using two sensors to detect the same gas
- Guaranteed for Life™ with replaceable sensors and batteries that extends the life of the instrument
- Optional AlarmAmp™ increases audible alarms to 110 dB
- Acknowledgeable gas alerts
INSTRUMENT WARRANTY
Guaranteed for Life™. Warranted for as long as the instrument is supported by Industrial Scientific Corporation (excludes sensors, batteries, and filters). CO and H2S sensors are warranted for three years. All other sensors are warranted for two years.
DISPLAY
- Segment liquid crystal display (LCD)
KEYPAD
- Two buttons
CASE MATERIALS
- Case top: Polycarbonate with a protective rubber overmold
- Case bottom: Conductive polycarbonate
ALARMS
- Three strobe-emitting visual alarm LEDs (two red; one blue)
- 100 decibel (dB) audible alarm at a distance of 10 cm (3.94 in);
- Vibration alarm
DIMENSIONS
- 99 x 51 x 35 mm (3.9 x 2.0 x 1.4 in)
WEIGHT
- 126.0 g (4.4 oz)
TEMPERATURE RANGE
-40 °C to 50 °C (-40 °F to 122 °F)
HUMIDITY RANGE
- 15% to 95% Non-condensing (continuous)
SENSORS
- CO, CO/H2, H2S, NO2, SO2 – Electrochemical sensor technology
SENSOR MEASURING RANGES
- Carbon Monoxide (CO): 0 to 1,000 ppm in 1 ppm increments
- Carbon Monoxide (CO/H2 low): 0 to 1,000 ppm in 1 ppm increments
- Hydrogen Sulfide (H2S): 0.0 to 500.0 ppm in 0.1 ppm increments
- Nitrogen Dioxide (NO2): 0.0 to 150.0 ppm in 0.1 ppm increments
- Sulfur Dioxide (SO2): 0.0 to 150.0 ppm in 0.1 ppm increments
BATTERY
3.6 V Primary lithium-thionyl chloride (Li-SOCl2); 1.5AH, 2/3AA; replaceable; non rechargeable; always on; up to 2-year run time depending on operating conditions
DATA LOGGING
- 3 months at 10-second intervals
EVENT LOGGING
- 60 alarm events
CERTIFICATIONS
- INGRESS PROTECTION IP66/67
-40 °C to 50 °C (-40 °F to 122 °F)
- ATEX: Ex ia I Ma; Ex ia IIC T4 Ga; Equipment Group/Category: I M1/II 1G CSA : Cl I, Gr A-D, T4; Ex ia IIC T4
- IECEx: Ex ia I Ma; Ex ia IIC T4 Ga INMETRO: Ex ia I Ma; Ex ia IIC T4 Ga
- UL (C-US): Cl I, Gr A-D, T4; Cl II, Gr E-G; Cl I, Zone 0, AEx ia IIC T4
-20 °C do 50 °C (-4 °F do 122 °F)
- China Ex: Ex ia IIC T4 Ga CMA: Ex ia I Ma; H2S, CO
- EAC: PO Ex ia I X; 0 Ex iX IIC T4 X
- KC: Ex ia IIC T4
ACCESSORIES
- DSX™ Docking Station for Tango® TX1
A – DSX Mode: 0 = DSX Standalone, 1 = DSXi Cloud-connected, 2 = DSX-L Local Server
B – Number of Gas Inlet Ports: 3 = 3 Ports, 6 = 6 Ports
C – Power Cord Type: 1 = North America, 2 = Europe, 3 = Australia, 4 = UK Replacement battery
- Soft nylon case, Black
- Soft nylon case, Safety Orange
- Dust barrier kit, 5 pack
- Water barrier kit, 5 pack
- CalCup and tubing kit
- Suspender clip
- AlarmAmp, Black
- AlarmAmp, Safety Orange Black
- Nameplate: Green, Yellow, Blue, White